НЕФТЕПРОМАВТОМАТИКА

Product > Hardware part > Combined controller BRIG-015-K202

Information and control device, explosion-protected version

Purpose

This product is intended to control output from oil or petroleum products output unit to tank trucks or railway tanks, and to display the process status in the alphanumeric mode. This product is suitable for installation and use in explosion-hazardous zones, according to the marking printed on the case.

Scope of application

This device has been designed to operate as a component of a fueling system at oil-loading stations located in explosion-hazardous zones.

Technical specifications:

Power supply voltage: 220 V+10%.
Power source type: AC, 50 Hz
Power consumption, max: 150 W
Indicator type: LED, Alphanumeric display
Communication interface with the master: EIA-485
Communication protocol with the master: Modbus RTU
Slave device type: Densitometer or mass flow meter
Cable glands quantity: 4
Discrete inputs quantity (24 V, DC): 18
Number analog inputs (4-20 mA): up to 6
Discrete relay outputs quantity (24 V, 2 A, DC, 220 V, 1 A AC): 11
Number open collector: 8
Discrete inputs galvanic isolation: Optical
Operation mode: Continuous, twenty-four-hour
Enclosure protection rating: IP 65 (IEC 529-89)
Explosion protection marking: 1ExdIIBT3
Ambient temperature for product operation: -40..+40°С
Relative air humidity for product operation, max.: 100%
Weight, max.: 9 kg.
Dimensions, W x H x D: 290х246х111 mm.
Resistance and immunity to sinusoidal vibration: As per GOST 52931-2008, version N3
Resistance to ambient air temperature and humidity: As per GOST 15150-69, version U1

НЕФТЕПРОМАВТОМАТИКА

© All rights reserved
2000 — 2020
   

Continuing to use npaufa.ru, you agree to the use of cookies. More information can be found in Privacy policy .